Today I was able to wheel the frame into the garage (sorry Dear!) and was able to install the first fresh piece of kit onto the car. This is a big deal for me, as now I can start finally doing some re-assembly after years and years of disassembly and repairing/replacing parts. I spent about $1300 on front suspension rubber, shocks, brake drums, brake kit, kingpins, etc, etc.-- so over the next few weeks I'm going to put it all back on the car.  First new piece (upper control arm bumper) pushed into place. WooHoo !  Gathering up the bits and pieces to bolt back onto the front end.  Upper control arm in place with fresh rubber, powder coated arms and re-plated bolts. |